Acquire inputs and send outputs on Arduino boards

Run models on Arduino boards.

Acquire images and video from UVC compliant webcams.

Acquire video and images from generic video capture devices.

Generate code optimized for C2000 MCU.

Generate code optimized for STMicroelectronics STM32 Processor based boards

Acquire sensor and image data from your Raspberry Pi.

Acquire RF data using RTL-SDR.

Run models on Raspberry Pi.

Acquire and analyze data from NI-DAQmx devices.

Generate code optimized for Cortex-M processors.

Design SDR systems using USRP(R) Radio.

Prototype and test software-defined radio (SDR) systems using ADALM-PLUTO with MATLAB and Simulink

Generate and deploy code for STMicroelectronics STM32 Nucleo boards

Run models on Android devices

Acquire sensor and image data from built-in sensors on Android devices.

Design, simulate and deploy algorithms to fly Parrot Minidrones

Control instruments using Keysight (Agilent) VISA.

Acquire live images from IP Cameras that support MJPEG over HTTP/RTSP or H.264 over RTSP streams.

Access PX4 autopilot peripherals with UAV Toolbox and automatically build and deploy flight control algorithms with Embedded Coder

Run models on Arduino Due.

Run models on LEGO MINDSTORMS EV3.

Develop AUTOSAR software components for automotive systems.

Send and receive CAN messages with PEAK-System CAN devices.

Acquire video and images from GenTL compliant cameras.

Control instruments using NI-VISA.

Acquire video and images from GigE vision compliant cameras.

Acquire sensor data and control outputs on LEGO MINDSTORMS EV3

Run models on Apple iOS devices.

Design and prototype SDR systems using Xilinx Zynq-based radio

Control instruments using Rohde & Schwarz VISA (R&SVISA)

Acquire sensor and image data from built-in sensors on iOS devices.

NVIDIA GPU Support from GPU Coder

Acquire and analyze data from Measurement Computing DAQ devices

Send and receive CAN messages with Vector CAN devices.

Control Ryze Tello drones from MATLAB and acquire sensor and image data

Design, analyze, and prototype for Xilinx SoC and FPGA devices

Generate code for the ARM portion of the Zynq-7000 SoC.

Generate code for the FPGA portion of the Zynq-7000 SoC.

Acquire and analyze data from Digilent Analog Discovery.

Debug and test HDL code on Xilinx FPGAs and Zynq SoCs.

Acquire video and images from Point Grey cameras.

Generate code optimized for ARM Cortex-A processors.

Control Parrot drones from MATLAB and acquire sensor data

Interact with BeagleBone Black from MATLAB

Acquire video and images from Kinect for Windows Sensor.

Acquire and analyze data from Windows sound cards.

Design, analyze, and prototype for Texas Instruments C2000 microcontrollers

MATLAB Instrument Driver for use with PicoScope 3000 Series oscilloscopes (Beta release)

Generate code optimized for ARM Cortex-R processors

Generate code optimized for BeagleBone Black.

MATLAB Instrument Driver for use with PicoScope 5000 Series oscilloscopes

Control and acquire data from NI-SWITCH devices.

Generate HDL code for Xilinx development boards.

Send and receive CAN messages with Kvaser CAN devices.

Generate code optimized for C6000 DSP.

MATLAB instrument driver for Ocean Optics OmniDriver which supports a wide range of spectrometers

Debug and test HDL code on Microchip FPGAs using FPGA-in-the-loop

Acquire video and images from DCAM IEEE 1394 cameras.

Prototype and test software-defined radio (SDR) systems using USRP E310 with MATLAB and Simulink