Slider Properties
Control slider appearance and behavior
Sliders are UI components that allow the user to select a value along a continuum. Properties control the appearance and behavior of a slider. Use dot notation to refer to a particular object and property.
fig = uifigure; s = uislider(fig); s.Value = 20;
Slider
Value
— Slider value
0 (default) | numeric value
Slider value, specified as a numeric value. The numeric value must be
within the range specified by the Limits
property
value.
Limits
— Minimum and maximum slider values
[0 100] (default) | two-element numeric array
Minimum and maximum slider values, specified as a two-element numeric array. The first value must be less than the second value.
If you change Limits
such that the
Value
property is less than the new lower limit,
MATLAB® sets the Value
property to the new lower
limit. For example, suppose the Limits
property is
[0 100]
and Value
is 20. If the
Limits
changes to [50 100]
, then
MATLAB sets the Value
property to 50.
Similarly, if you change Limits
such that the
Value
property is greater than the new upper limit,
MATLAB sets the Value
property to the new upper
limit.
Orientation
— Orientation
'horizontal'
(default) | 'vertical'
Orientation of slider, specified as 'horizontal'
or
'vertical'
.
Ticks
MajorTicks
— Major tick mark locations
[0 20 40 60 80 100]
(default) | vector of numeric values | []
Major tick mark locations, specified as a vector of numeric values or an empty vector. If you do not want to show major tick marks, specify this property as an empty vector.
Tick locations that are outside the range of the Limits
property
do not display.
MATLAB removes duplicate tick values. However, if a major tick falls on the same value as a minor tick, only the major tick displays.
Setting the MajorTicks
property sets the
MajorTicksMode
property to 'manual'
.
MajorTicksMode
— Major tick creation mode
'auto'
(default) | 'manual'
Major tick creation mode, specified as one of the following:
'auto'
— MATLAB determines the placement of major ticks.'manual'
— You specify theMajorTicks
value array.
MajorTickLabels
— Major tick labels
{'0','20','40','60','80','100'}
(default) | cell array of character vectors | string array | {}
| ...
Major tick labels, specified as a cell array of character vectors, string array, or
1-D categorical array. If you do not want to show tick labels, specify this property as
an empty cell array. If you want to remove a label from a specific tick mark, specify an
empty character vector or empty string scalar for the corresponding element in the
MajorTickLabels
array. If you specify this property as a
categorical array, MATLAB uses the values in the array, not the full set of categories.
If the length of the MajorTickLabels
array is different from the
length of the MajorTicks
vector, MATLAB ignores the extra entries of the longer array. If there are extra labels,
they are ignored. If there are extra tick marks, they display without labels.
Setting MajorTickLabels
changes the
MajorTickLabelsMode
value to 'manual'
.
Note
Setting MajorTickLabels
when
MajorTicksMode
is 'auto'
might lead to
unexpected results. To avoid this behavior, set MajorTicksMode
to 'manual'
and manually specify the value of
MajorTicks
before setting
MajorTickLabels
.
MajorTickLabelsMode
— Major tick labels mode
'auto'
(default) | 'manual'
Major tick labels mode, specified as one of the following:
'auto'
— MATLAB specifies the major tick labels.'manual'
— You specify the major tick labels using theMajorTickLabels
property.
MinorTicks
— Minor tick mark locations
[0 4 8 12 ... 100]
(default) | vector of numeric values | []
Minor tick mark locations, specified as a vector of numeric values or an empty vector. If you do not want to show minor tick marks, specify this property as an empty vector.
Tick locations that are outside the range of the Limits
property
do not display.
MATLAB removes duplicate tick values. However, if a minor tick falls on the same value as a major tick, only the major tick displays.
Setting the MinorTicks
property value sets the
MinorTicksMode
property value to 'manual'
.
MinorTicksMode
— Minor tick creation mode
'auto'
(default) | 'manual'
Minor tick creation mode, specified as 'auto'
or 'manual'
.
When MinorTicksMode
is set to 'auto'
, MATLAB determines
the placement of minor ticks.
Font
FontName
— Font name
system supported font name
Font name, specified as a system supported font name. The default font depends on the specific operating system and locale.
If the specified font is not available, then MATLAB uses the best match among the fonts available on the system where the app is running.
Example: 'Arial'
FontSize
— Font size
positive number
Font size, specified as a positive number. The units of measurement are pixels. The default font size depends on the specific operating system and locale.
Example: 14
FontWeight
— Font weight
'normal'
(default) | 'bold'
Font weight, specified as one of these values:
'normal'
— Default weight as defined by the particular font'bold'
— Thicker character outlines than'normal'
Not all fonts have a bold font weight. For fonts that do not, specifying
'bold'
results in the normal font weight.
FontAngle
— Font angle
'normal'
(default) | 'italic'
Font angle, specified as 'normal'
or 'italic'
.
Not all fonts have an italic font angle. For fonts that do not, specifying
'italic'
results in the normal font angle.
FontColor
— Font color
[0 0 0]
(default) | RGB triplet | hexadecimal color code | 'r'
| 'g'
| 'b'
| ...
Font color, specified as an RGB triplet, a hexadecimal color code, or one of the options listed in the table.
RGB triplets and hexadecimal color codes are useful for specifying custom colors.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
; for example,[0.4 0.6 0.7]
.A hexadecimal color code is a character vector or a string scalar that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Thus, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name | Short Name | RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|---|---|
"red" | "r" | [1 0 0] | "#FF0000" | |
"green" | "g" | [0 1 0] | "#00FF00" | |
"blue" | "b" | [0 0 1] | "#0000FF" | |
"cyan"
| "c" | [0 1 1] | "#00FFFF" | |
"magenta" | "m" | [1 0 1] | "#FF00FF" | |
"yellow" | "y" | [1 1 0] | "#FFFF00" | |
"black" | "k" | [0 0 0] | "#000000" | |
"white" | "w" | [1 1 1] | "#FFFFFF" |
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB uses in many types of plots.
RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|
[0 0.4470 0.7410] | "#0072BD" | |
[0.8500 0.3250 0.0980] | "#D95319" | |
[0.9290 0.6940 0.1250] | "#EDB120" | |
[0.4940 0.1840 0.5560] | "#7E2F8E" | |
[0.4660 0.6740 0.1880] | "#77AC30" | |
[0.3010 0.7450 0.9330] | "#4DBEEE" | |
[0.6350 0.0780 0.1840] | "#A2142F" |
Interactivity
Visible
— State of visibility
'on'
(default) | on/off logical value
State of visibility, specified as 'on'
or 'off'
,
or as numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true
, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Display the object.'off'
— Hide the object without deleting it. You still can access the properties of an invisible UI component.
To make your app start faster, set the Visible
property to
'off'
for all UI components that do not need to appear at
startup.
Enable
— Operational state
'on'
(default) | on/off logical value
Operational state, specified as 'on'
or 'off'
,
or as numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true
, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
If you set this property to
'on'
, the app user can interact with the component.If you set this property to
'off'
, the component appears dimmed, indicating that the app user cannot interact with it, and that it will not trigger a callback.
Tooltip
— Tooltip
''
(default) | character vector | cell array of character vectors | string array | 1-D categorical array
Tooltip, specified as a character vector, cell array of character vectors, string array, or 1-D categorical array. Use this property to display a message when the user hovers the pointer over the component at run time. The tooltip displays even when the component is disabled. To display multiple lines of text, specify a cell array of character vectors or a string array. Each element in the array becomes a separate line of text. If you specify this property as a categorical array, MATLAB uses the values in the array, not the full set of categories.
ContextMenu
— Context menu
empty GraphicsPlaceholder
array (default) | ContextMenu
object
Context menu, specified as a ContextMenu
object created using the uicontextmenu
function. Use this property to display a context menu when
you right-click on a component.
Position
Position
— Location and size of slider
[100 100 150 3]
(default) | [left bottom width height]
Location and size of the slider excluding tick marks and labels, specified
as a vector of the form [left bottom width height]
. This
table describes each element in the vector.
Element | Description |
---|---|
left | Distance from the inner left edge of the parent container to the outer left edge of the slider |
bottom | Distance from the inner bottom edge of the parent container to the outer bottom edge of the slider |
width | Distance between the right and left outer edges of the slider |
height | Distance between the top and bottom outer edges of the slider |
All measurements are in pixel units.
You cannot change the height of a slider when the
Orientation
property value is
'horizontal'
. Similarly, you cannot change the width
of a slider when the Orientation
property value is
'vertical'
.
The Position
values
are relative to the drawable area of the parent
container. The drawable area is the area inside the borders of the container
and does not include the area occupied by decorations such as a menu bar or
title.
Example: [100 200 200 3]
InnerPosition
— Inner location and size of slider
[100 100 150 3]
(default) | [left bottom width height]
Inner location and size of the slider, excluding tick marks and tick
labels, specified as a vector of the form [left bottom width
height]
. Position values are relative to the parent container.
All measurements are in pixel units. This property value is identical to the
Position
property.
OuterPosition
— Outer location and size of slider
[94 70 166 39]
(default) | [left bottom width height]
This property is read-only.
Outer location and size of the slider, including tick marks and tick
labels, specified as a vector of the form [left bottom width
height]
. Position values are relative to the parent container.
All measurements are in pixel units.
Layout
— Layout options
empty LayoutOptions
array (default) | GridLayoutOptions
object
Layout options, specified as a
GridLayoutOptions
object. This property specifies
options for components that are children of grid layout containers. If the
component is not a child of a grid layout container (for example, it is a
child of a figure or panel), then this property is empty and has no effect.
However, if the component is a child of a grid layout container, you can
place the component in the desired row and column of the grid by setting the
Row
and Column
properties on
the GridLayoutOptions
object.
For example, this code places a slider in the third row and second column of its parent grid.
g = uigridlayout([4 3]); s = uislider(g); s.Layout.Row = 3; s.Layout.Column = 2;
To make the slider span multiple rows or columns, specify the
Row
or Column
property as a
two-element vector. For example, this slider spans columns
2
through
3
:
s.Layout.Column = [2 3];
Callbacks
ValueChangedFcn
— Value changed callback
''
(default) | function handle | cell array | character vector
Value changed callback, specified as one of these values:
A function handle.
A cell array in which the first element is a function handle. Subsequent elements in the cell array are the arguments to pass to the callback function.
A character vector containing a valid MATLAB expression (not recommended). MATLAB evaluates this expression in the base workspace.
This callback executes when the user moves the thumb to a different position on the slider. The callback does not execute if the slider value changes programmatically.
This callback function can access specific information about the user’s interaction
with the slider. MATLAB passes this information in a ValueChangedData
object as the second argument to your callback function.
In App Designer, the argument is called event
. You can query the
object properties using dot notation. For example,
event.PreviousValue
returns the previous value of the slider. The
ValueChangedData
object is not available to
callback functions specified as character vectors.
The following table lists the properties of the ValueChangedData
object.
Property | Value |
---|---|
Value | Value of slider after app user’s most recent interaction with it |
PreviousValue | Value of slider before app user’s most recent interaction with it |
Source | Component that executes the callback |
EventName | 'ValueChanged' |
For more information about writing callbacks, see Callbacks in App Designer.
ValueChangingFcn
— Value changing callback
''
(default) | function handle | cell array | character vector
Value changing callback, specified as one of these values:
A function handle.
A cell array in which the first element is a function handle. Subsequent elements in the cell array are the arguments to pass to the callback function.
A character vector containing a valid MATLAB expression (not recommended). MATLAB evaluates this expression in the base workspace.
This callback executes as the user moves the thumb along the slider in the app. It
does not execute if the Value
property changes
programmatically.
This callback can access specific information about the user’s interaction with the
slider. MATLAB passes this information in a ValueChangingData
object as the second argument to your callback
function. In App Designer, the argument is called event
. You can
query the object properties using dot notation. For example,
event.Value
returns the current value of the slider. The ValueChangingData
object is not available to callback
functions specified as character vectors.
This table lists the properties of the ValueChangingData
object.
Property | Value |
---|---|
Value | Current value of the slider as the app user is interacting with it |
Source | Component that executes the callback |
EventName | 'ValueChanging' |
The Value
property of the Slider
object is not updated until the user releases the slider thumb.
Therefore, to get the value as the thumb is being moved, your code must get the
Value
property of the ValueChangingData
object.
Note
Avoid updating the Value
property of the
Slider
object from within its own
ValueChangingFcn
callback, as this might result in unexpected
behavior. To update the slider value in response to user input, use a
ValueChangedFcn
callback instead.
The ValueChangingFcn
callback executes as follows:
If the app user clicks the slider value once, then the callback executes a single time. For example, if the slider is on 1.0, and the app user single-clicks at 1.1, then the callback executes once.
If the app user clicks and drags the slider to a new position, the callback executes repeatedly. For example, if the slider value is 1.0, and the app user clicks, holds, and drags the thumb to value 10.0, then the callback executes multiple times until the app user releases the thumb.
For more information about writing callbacks, see Callbacks in App Designer.
CreateFcn
— Creation function
''
(default) | function handle | cell array | character vector
Object creation function, specified as one of these values:
Function handle.
Cell array in which the first element is a function handle. Subsequent elements in the cell array are the arguments to pass to the callback function.
Character vector containing a valid MATLAB expression (not recommended). MATLAB evaluates this expression in the base workspace.
For more information about specifying a callback as a function handle, cell array, or character vector, see Callbacks in App Designer.
This property specifies a callback function to execute when MATLAB creates the object. MATLAB initializes all property values before executing the CreateFcn
callback. If you do not specify the CreateFcn
property, then MATLAB executes a default creation function.
Setting the CreateFcn
property on an existing component has no effect.
If you specify this property as a function handle or cell array, you can access the object that is being created using the first argument of the callback function. Otherwise, use the gcbo
function to access the object.
DeleteFcn
— Deletion function
''
(default) | function handle | cell array | character vector
Object deletion function, specified as one of these values:
Function handle.
Cell array in which the first element is a function handle. Subsequent elements in the cell array are the arguments to pass to the callback function.
Character vector containing a valid MATLAB expression (not recommended). MATLAB evaluates this expression in the base workspace.
For more information about specifying a callback as a function handle, cell array, or character vector, see Callbacks in App Designer.
This property specifies a callback function to execute when MATLAB deletes the object. MATLAB executes the DeleteFcn
callback before destroying the
properties of the object. If you do not specify the DeleteFcn
property, then MATLAB executes a default deletion function.
If you specify this property as a function handle or cell array, you can access the
object that is being deleted using the first argument of the callback function.
Otherwise, use the gcbo
function to access the
object.
Callback Execution Control
Interruptible
— Callback interruption
'on'
(default) | on/off logical value
Callback interruption, specified as 'on'
or 'off'
, or as
numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true
, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
This property determines if a running callback can be interrupted. There are two callback states to consider:
The running callback is the currently executing callback.
The interrupting callback is a callback that tries to interrupt the running callback.
MATLAB determines callback interruption behavior whenever it executes a command that
processes the callback queue. These commands include drawnow
, figure
, uifigure
, getframe
, waitfor
, and pause
.
If the running callback does not contain one of these commands, then no interruption occurs. MATLAB first finishes executing the running callback, and later executes the interrupting callback.
If the running callback does contain one of these commands, then the
Interruptible
property of the object that owns the running
callback determines if the interruption occurs:
If the value of
Interruptible
is'off'
, then no interruption occurs. Instead, theBusyAction
property of the object that owns the interrupting callback determines if the interrupting callback is discarded or added to the callback queue.If the value of
Interruptible
is'on'
, then the interruption occurs. The next time MATLAB processes the callback queue, it stops the execution of the running callback and executes the interrupting callback. After the interrupting callback completes, MATLAB then resumes executing the running callback.
Note
Callback interruption and execution behave differently in these situations:
If the interrupting callback is a
DeleteFcn
,CloseRequestFcn
, orSizeChangedFcn
callback, then the interruption occurs regardless of theInterruptible
property value.If the running callback is currently executing the
waitfor
function, then the interruption occurs regardless of theInterruptible
property value.If the interrupting callback is owned by a
Timer
object, then the callback executes according to schedule regardless of theInterruptible
property value.
BusyAction
— Callback queuing
'queue'
(default) | 'cancel'
Callback queuing, specified as 'queue'
or 'cancel'
. The BusyAction
property determines how MATLAB handles the execution of interrupting callbacks. There are two callback states to consider:
The running callback is the currently executing callback.
The interrupting callback is a callback that tries to interrupt the running callback.
The BusyAction
property determines callback queuing behavior only
when both of these conditions are met:
Under these conditions, the BusyAction
property of the
object that owns the interrupting callback determines how MATLAB handles the interrupting callback. These are possible values of the
BusyAction
property:
'queue'
— Puts the interrupting callback in a queue to be processed after the running callback finishes execution.'cancel'
— Does not execute the interrupting callback.
BeingDeleted
— Deletion status
on/off logical value
This property is read-only.
Deletion status, returned as an on/off logical value of type matlab.lang.OnOffSwitchState
.
MATLAB sets the BeingDeleted
property to
'on'
when the DeleteFcn
callback begins
execution. The BeingDeleted
property remains set to
'on'
until the component object no longer exists.
Check the value of the BeingDeleted
property to verify that the object is not about to be deleted before querying or modifying it.
Parent/Child
Parent
— Parent container
Figure
object (default) | Panel
object | Tab
object | ButtonGroup
object | GridLayout
object
Parent container, specified as a Figure
object
created using the uifigure
function, or one of its child
containers: Tab
, Panel
, ButtonGroup
, or GridLayout
. If no container is specified, MATLAB calls the uifigure
function to create a new Figure
object that serves as the parent container.
HandleVisibility
— Visibility of object handle
'on'
(default) | 'callback'
| 'off'
Visibility of the object handle, specified as 'on'
, 'callback'
,
or 'off'
.
This property controls the visibility of the object in its parent's
list of children. When an object is not visible in its parent's list
of children, it is not returned by functions that obtain objects by
searching the object hierarchy or querying properties. These functions
include get
, findobj
, clf
,
and close
. Objects are valid
even if they are not visible. If you can access an object, you can
set and get its properties, and pass it to any function that operates
on objects.
HandleVisibility Value | Description |
---|---|
'on' | The object is always visible. |
'callback' | The object is visible from within callbacks or functions invoked by callbacks, but not from within functions invoked from the command line. This option blocks access to the object at the command-line, but allows callback functions to access it. |
'off' | The object is invisible at all times. This option is useful
for preventing unintended changes to the UI by another function. Set
the HandleVisibility to 'off' to
temporarily hide the object during the execution of that function.
|
Identifiers
Type
— Type of graphics object
'uislider'
This property is read-only.
Type of graphics object, returned as 'uislider'
.
Tag
— Object identifier
''
(default) | character vector | string scalar
Object identifier, specified as a character vector or string scalar. You can specify a unique Tag
value to serve as an identifier for an object. When you need access to the object elsewhere in your code, you can use the findobj
function to search for the object based on the Tag
value.
UserData
— User data
[]
(default) | array
User data, specified as any MATLAB array. For example, you can specify a scalar, vector, matrix, cell array, character array, table, or structure. Use this property to store arbitrary data on an object.
If you are working in App Designer, create public or private properties in the app to share data instead of using the UserData
property. For more information, see Share Data Within App Designer Apps.
Version History
Introduced in R2016a
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other bat365 country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)