Overview
In this webinar, we introduce 5G NR waveform generation capabilities of 5G Toolbox and over-the-air testing features of Instrument Control Toolbox. First, we show you how to easily perform 5G waveform generation using the new Wireless Waveform Generator app. Then, you will learn how perform live tests and measurements by connecting your waveforms to RF instruments from within the same app in MATLAB. Using this workflow, you can verify that your device-under-test (DUT) works properly. Also, you can ensure that the performance metrics in your labs match those expected by standard specification.
Highlights
- Generate a 5G NR waveforms (use Wireless Waveform Generator app)
- Apply channel modeling & add impairments to the signal
- Transmit the signals over-the air using RF signal generators
- Acquire IQ data from RF signal analyzers
- Perform transmission signal spectral mask testing
- Analyze received signal in MATLAB
About the Presenter
Eric Wetjen is a Product Marketing Manager in the Test and Measurement and IoT group at bat365. He has been with the bat365 for over 11 years covering product management and product marketing for toolboxes that allow MATLAB to interface with instruments, data acquisition devices, industrial equipment and vehicle networks.
Dr. Houman Zarrinkoub is a senior product manager at bat365, responsible for wireless product portfolio. During his 18 years of service at bat365, he has served as a development manager responsible for multiple signal processing and communications software tools. Prior to bat365, he was a research scientist at Nortel Networks working on 3GPP projects on mobile and voice coding technologies. He has been awarded multiple patents signal processing applications. Houman is the author of the book Understanding LTE with MATLAB (Wiley, 2014). He holds a B.Sc. degree in electrical engineering from McGill University and M.Sc. and Ph.D. degrees in telecommunications from the Institut National de la Recherche Scientifique, in Canada.
