bat365 Homepage

Hardware and Software Requirements

Required bat365 Products

To use the I/O mode features of the Communications Toolbox™ Support Package for Xilinx^® Zynq^®-Based Radio, the following bat365^® products are required:

MATLAB^®
Communications Toolbox
Signal Processing Toolbox™
DSP System Toolbox™

To work with the hardware-software co-design workflow, the following bat365 products are also required:

Simulink^®
To target the FPGA fabric on the device: HDL Coder™ Support Package for Xilinx Zynq Platform (requires HDL Coder)
To target the ARM^® processor on the device: Embedded Coder^® Support Package for Xilinx Zynq Platform (requires Embedded Coder, Simulink Coder™, and the ARM Cortex^®-A support package)

Required Third-Party Tools

Third-party tools required by the I/O mode features are automatically downloaded and installed during the support package installation.
To work with the hardware-software co-design and FPGA targeting workflows, you must manually install the following third-party tools:
- Xilinx Vivado^® development tools, version 2019.1

Hardware Support

Xilinx Zynq-7000 All Programmable SoC ZC706 Evaluation Kit

Product Name	Xilinx Part Number	RF Boards^a	MATLAB Support	Simulink Support	I/O Peripheral Support	Hardware-Software Co-Design Support
ZC706	EK-Z7-ZC706-G	Analog Devices FMCOMMS2 Analog Devices FMCOMMS3 Analog Devices FMCOMMS4	`comm.SDRDevAD936x` radio object `comm.SDRRxAD936x` receiver System object™ `comm.SDRTxAD936x` transmitter System object	AD936x Receiver block AD936x Transmitter block	Yes	Yes
Analog Devices FMCOMMS5	`comm.SDRDevFMCOMMS5` radio object `comm.SDRRxFMCOMMS5` receiver System object `comm.SDRTxFMCOMMS5` transmitter System object	FMCOMMS5 Receiver block FMCOMMS5 Transmitter block	Yes	Yes
^a The FMCOMMS RF card tends to fall out of the slot on the Zynq development board, especially when using a heavy antenna. Use the standoffs that come with the SDR development kit.

Xilinx Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit

Product Name	Xilinx Part Number	RF Boards^a	MATLAB Support	Simulink Support	I/O Peripheral Support	Hardware-Software Co-Design Support
ZCU102	EK-U1-ZCU102-G	Analog Devices FMCOMMS2 Analog Devices FMCOMMS3 Analog Devices FMCOMMS4	`comm.SDRDevAD936x` radio object `comm.SDRRxAD936x` receiver System object `comm.SDRTxAD936x` transmitter System object	AD936x Receiver block AD936x Transmitter block	Yes	Yes
^a The FMCOMMS RF card tends to fall out of the slot on the Zynq development board, especially when using a heavy antenna. Use the standoffs that come with the SDR development kit.

Avnet ZedBoard

Product Name	Avnet^® Part Number	RF Boards^a	MATLAB Support	Simulink Support	I/O Peripheral Support	Hardware-Software Co-Design Support
ZedBoard^b	AES-Z7EV-7Z020-G	Analog Devices FMCOMMS2 Analog Devices FMCOMMS3 Analog Devices FMCOMMS4	`comm.SDRDevAD936x` radio object `comm.SDRRxAD936x` receiver System object `comm.SDRTxAD936x` transmitter System object	AD936x Receiver block AD936x Transmitter block	Yes	Yes
^a The FMCOMMS RF card tends to fall out of the slot on the Zynq development board, especially when using a heavy antenna. Use the standoffs that come with the SDR development kit. ^b ZedBoard™ Rev B and earlier revisions must have a heat sink attached. (Rev C and later revisions have the heat sink attached already.) If your board has an FMC radio attached but no heat sink, the Zynq processor overheats and stops working.

ADI RF SOM

Product Name	Analog Devices^® Part Number	Description	MATLAB Support	Simulink Support	I/O Peripheral Support	Hardware-Software Co-Design Support
ADI RF SOM (2x2 only)	ADRV9361-Z7035	XC7Z035 / AD9361 SOM	`comm.SDRDevAD936x` radio object `comm.SDRRxAD936x` receiver System object `comm.SDRTxAD936x` transmitter System object	AD936x Receiver block AD936x Transmitter block	Yes	Yes
SDR Module Carrier/FMC Carrier	ADRV1CRR-FMC	Full-featured carrier
SDR Module Carrier/Break Out Board	ADRV1CRR-BOB	Breakout carrier

PicoZed SDR (Before R2017b)

Hardware and Software Requirements

Required bat365 Products

Required Third-Party Tools

Hardware Support

Related Topics